LIXiSE

LXC6610: Auto Stare Module, controls genset to start or stop automatically by remote start signal.

Main Characteristics:

• With ARM-based 32-bit CPU, highly integrated hardware, new reliability level;
  
• 240x128 LCD with backlight, multilingual interface(including English, Chinese or other languages) which can be chosen at the site, making commissioning convenient for factory personnel;
• Built-in WIFI connection, can directly connect to the smartphone or wireless router, for remote monitoring, also has built-in mass storage, when no WIFI or mobile network, it can save all operational data within the module, once connected to the external network automatically updates the data to the cloud server;
• with advanced self-health check function, the controller through a more comprehensive way to collect generator data, and a variety of WIFI connection technology, connect the cloud server for the generator to do data analysis, to detect potential failures in advance, to improve the operational reliability of the unit, allowing users to save manual check the cost.
• With power generation data record function: record and store each process of power generation, contains the start time, shut off time, power generation time, generating electricity. It can record recently 6000 power generation records, as an effective basis for power generation cost accounting;
• Fault records: can record the last 6,000 fault records, the controller detects all the generator operating data of fault moment and saved to the Flash memory, can be displayed on the screen, can also be uploaded and query to the computer and mobile phone.
• With the average load rate calculation function, let users understand the generator loading situation;
• Equipped with real-time clock,regular maintenance functions;
• With 2 groups of automatic cycle on / off function, can set the start time, shut off time by months, weeks, days, and whether automatically loaded after starting;
• 3 set of maintenance functions, can be set for the machine maintenance cycle .Maintenance time to action can be set up(only warning or alarm stop);
• 99% of the parameters can be set directly from the front panel for easy on-site commissioning; All parameters can use the computer via USB, RS232 interface to connect and adjust, while the internal FLASH memory within the controller in the system when power is not lost;
• Using MODBUS protocol can achieve "three remote" function; (RS232 and USB as standard configuration)
• Equipped with SMS(Short Message Service)function. When genset is alarming, controller can send short messages via SMS automatically to max.5 telephone numbers. besides, generator status can be controlled and checked using SMS. With advanced networking capabilities, via GPRS mobile network and Internet connectivity, in any place where the network can be remotely monitor;( Need to install the wireless communication module based on the mobile phone card：LXI880/LXI980);
• Suitable for 3-phase 4-wire,3-phase 3wire,single phase 2-wire,and 2-phase 3-wire (120/240V)power and 50/60Hz Systems;
• Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains;
• For Mains, controller has over and under voltage, over and under frequency, loss of phase and phase sequence wrong detection functions; For generator, controller has over and under voltage, over and under frequency, loss of phase, phase sequence wrong, over current functions;